Construction Site Security
Jobsites are prime targets after dark — copper, tools, heavy equipment and fuel walk off, and fences get cut. QORA adds AI construction site security monitoring to the jobsite cameras you already run: it turns them into automated surveillance for after-hours people and vehicles, perimeter and restricted-zone crossings, and movement around equipment and materials — surfacing likely incidents for a person to confirm. It also watches the cameras themselves, so a feed that drops offline doesn't go unnoticed.
Detections tuned for construction sites
Illustrative — QORA output shown on representative scenes, not customer footage.
After-hours intrusion
People or vehicles entering the site outside working hours are flagged the moment they appear on a monitored camera.
Equipment & material theft
Movement around laydown yards, tool cribs, generators and fuel tanks is surfaced for a quick human check.
Perimeter & fence line
Draw the site boundary once; QORA watches gates, fence lines and access roads for breaches.
License plates at the gate
Read plates on vehicles entering and leaving, match them to watchlists, and keep a searchable log for investigations.
Why teams choose QORA
- No rip-and-replace — QORA works with your existing IP, RTSP and ONVIF jobsite cameras and NVRs.
- An on-site edge appliance keeps analysis local, so it works even where connectivity is poor and bandwidth is expensive.
- AI triages and de-duplicates events so your team reviews real incidents, not thousands of motion alerts.
- Every alert is a candidate for human confirmation — QORA never takes automated action against a person.
Your existing cameras, edge or cloud
Existing-camera requirements
QORA connects to the IP, RTSP and ONVIF cameras and NVRs already on your site — no rip-and-replace. Detection quality comes down to the basics: a clear view of entrances, fence lines and laydown areas, enough resolution to make out a person or plate at range, and usable light or IR after dark.
Edge, cloud or hybrid
Run inference on an on-site edge appliance for low latency and to keep video local where bandwidth or connectivity is tight, use the cloud, or split the two per site — you choose what runs where and what leaves the jobsite.
Camera-health monitoring
QORA flags cameras that drop offline, lose focus or get knocked out of position, so a blind spot on your site doesn't sit unnoticed until the moment you need the footage.
New to AI on jobsite cameras? Read how AI construction site security monitoring works — what it can and can't determine, camera resolution and placement, edge vs. cloud, and how a pilot measures accuracy on your own site.
How an incident is handled
1 · Detect
QORA analyzes your existing camera feeds for the scenarios you turn on.
2 · AI Review
Obvious false alarms are auto-resolved and related detections are grouped, so your team sees real incidents — not raw motion.
3 · Human confirms
A person reviews the flagged incident. QORA never takes automated action against a person.
4 · Alert & log
Confirmed incidents notify your recipients and stay in a searchable, audited log.
Privacy & operational considerations
You own your data
Configurable retention and deletion. Sensitive analytics stay off unless you explicitly enable them.
Human in the loop
QORA surfaces events for a person to confirm — no automated adverse action, no inferred protected-class decisions.
Works where connectivity is poor
An on-site edge appliance keeps analysis local, so detection keeps running even on jobsites with limited or intermittent internet.
QORA surfaces events for your team to act on — it is a monitoring and notification tool, not a guard service or alarm-monitoring center. You are responsible for lawful camera placement and any required notice or signage. See our Privacy Policy.
Construction security by location
QORA is deployed remotely on your existing cameras, so we support jobsites across the US, with location guides for:
Construction security in Chicago, IL · Austin, TX · Round Rock · Cedar Park · Pflugerville · Leander · Georgetown
Construction security FAQs
Do I need to replace my jobsite cameras?
No. QORA works with the IP, RTSP and ONVIF cameras and NVRs you already run. Detection quality depends on view, resolution and lighting, which we check before any pilot.
Does QORA prevent theft or replace guards?
No. QORA is a monitoring and notification tool. It surfaces after-hours activity and equipment-theft indicators for a person to review and act on — it is not a guard service, an alarm-monitoring center, or a substitute for emergency services.
Will it work where the site has poor internet?
Yes. An on-site edge appliance keeps analysis local, so detection keeps running on jobsites with limited or intermittent connectivity; only events, snapshots and metadata need to leave the site.
How do you keep false alarms down?
QORA's AI Review auto-resolves obvious false alarms and groups related detections, and every flagged incident is a candidate for human confirmation. A 30-day pilot measures the false-positive rate on your own cameras before you commit.
Ready to see everything?
Talk to us about a pilot on your cameras — book a 20-minute demo.
Explore: Platform · Security & Trust · 30-Day Pilot · How AI monitoring works